Knits
- Jersey
- French terry
- Fleece
- Rib
- Interlock
- Piqué
Tees, hoodies, sweatshirts and polos. The backbone of almost every range we produce.
Sialkot, Pakistan — OEM & ODM
Private label
apparel, built
your way.
We manufacture streetwear, fitness wear and teamwear for brands worldwide — developing the fabric, cutting the pattern and finishing the branding around your product, not around our stock list. Minimum order 25 pieces.
- 25pcs
- Minimum order
- 10,000+/mo
- Monthly capacity
- 5–7days
- Sample development
- 6–12days
- Bulk production
What we make
3 lines.
78 categories.
Each line runs on its own fabric library, pattern blocks and finishing methods. Most brands start in one and expand across all three.
01 — 20 categories
Streetwear
Heavyweight fabrics, considered fits, finishing that survives the wash.
- T-Shirts
- Sweatshirts
- Hoodies
- Zipper Hoodies
- +16 more
02 — 18 categories
Fitness Wear
Performance fabrics, engineered fits, seams that hold up under load.
- Gym T-Shirts
- Tanks & Stringers
- Hoodies & Sweatshirts
- Gym Shorts
- +14 more
03 — 40 categories
Sports Wear
Forty disciplines, one production line, no compromise on kit accuracy.
- Football / Soccer
- Futsal
- Basketball
- Cricket
- +36 more
How it runs
Your idea in.
A finished product out.
Eight stages, and you sign off before the expensive one. Nothing reaches bulk production until you have held a physical sample and approved it.
- 01
Your Brief
Send a tech pack, a sketch, a reference garment or just a description. We work from whatever you actually have and fill the gaps ourselves.
- 02
Development
We come back with construction options, fabric routes and an honest cost picture — including where a cheaper choice would hurt the product.
- 03
Fabric Selection
Composition, GSM, knit structure and finish are locked against physical swatches. Custom fabric development where stock options will not do.
- 04
Pattern & Fit
Blocks are cut to your measurements and graded across the full size run. Extremes are sampled, not just the mid-size.
- 05
Sample Approval
You get a physical pre-production sample. Nothing enters bulk until you have held it, worn it and signed it off.
- 06
Bulk Production
Cutting, sewing and decoration run against the approved sample, with in-line checks at every stage rather than one inspection at the end.
- 07
Quality Control
Seven-point inspection, ending in a final AQL check. Anything outside tolerance is remade before it is packed.
- 08
Packing & Shipping
Folded, tagged and bagged in your packaging, then shipped worldwide by air or sea with full documentation.
Decoration
Your artwork,
built into the garment.
Eighteen methods across printing, embroidery and applied trims. We match the method to the fabric and the artwork rather than forcing everything through one process.
Printing
11Screen Printing
Best value at volume. Sharp solid colours, durable on cotton.
DTF Printing
Full-colour transfer that works across almost any fabric type.
DTG Printing
Photographic detail direct to garment. Ideal for complex artwork.
Puff Printing
Raised ink for a tactile, dimensional finish on heavyweight fleece.
Silicone Printing
Soft, stretchy and washfast. Good on performance fabrics.
Rubber Printing
Thick, opaque and hard-wearing. Strong on dark grounds.
Sublimation Printing
Dye enters the fibre, so it cannot crack or peel. Teamwear standard.
High-Density Printing
Sharp raised edges with a moulded, almost solid feel.
Discharge Printing
Removes dye rather than adding ink. Prints feel like the fabric itself.
Foil Printing
Metallic finish applied over adhesive. High shine, high impact.
Reflective Printing
Retroreflective ink for visibility in low light.
Embroidery
04Flat Embroidery
Classic stitched logo. Clean at small scale, durable at any.
3D Puff Embroidery
Foam-backed stitching that stands proud. Caps and heavy fleece.
Chenille Embroidery
Looped yarn patches. The varsity jacket signature.
Appliqué
Fabric shapes stitched onto the garment, often over twill.
Trims & Applied
03Patches
Woven, leather, PU, silicone, embossed and debossed.
Rhinestones & Crystals
Heat-set stones for premium and occasion pieces.
Sequins
Reversible and fixed sequin work for statement placements.
Fabric library
The right fabric,
not the nearest one.
Six families to start from, and full custom development when none of them is right. Composition, GSM, knit structure and finish are all yours to set.
Wovens
- Twill
- Canvas
- Denim
- Corduroy
- Flannel
- Poplin
Pants, shorts, shirting and jackets, where structure matters more than stretch.
Outerwear
- Nylon
- Ripstop
- Softshell
- Taffeta
- Melton wool
- Quilted shell
Bombers, puffers, windbreakers and snow shells. Chosen against a weather spec.
Technical
- Mesh
- Performance stretch
- Water-repellent
- Compression knit
- Seamless knit
Activewear, teamwear and anything measured on stretch recovery and moisture movement.
Sustainable
- Organic cotton
- Recycled nylon
- Recycled polyester
- Hemp
- Recycled cotton
Ranges with a stated environmental claim. Certification documents supplied on request.
Blends
- Cotton-poly
- Tri-blend
- Modal
- Spandex
- Viscose
- Bamboo blend
Where you want a specific hand feel or drape that no single fibre delivers alone.
Private label
It leaves here
as your product.
Nothing on the finished garment says AB Industria. Labels, tags, hardware and packaging all carry your identity, and they are specified alongside the product rather than added at the end.
Woven Labels
Damask, satin and taffeta neck labels in your own artwork and colours.
Neck Prints
Tagless heat-transfer or screen-printed neck branding for a cleaner finish.
Care Labels
Compliant wash and composition labels for your destination market.
Hangtags
Card stock, print finish, string and pin all specified to your design.
Patches
Woven, leather, PU, silicone, embossed and debossed, applied in production.
Custom Hardware
Branded zip pullers, snaps, buttons, rivets, drawcord tips and webbing.
Packaging
Polybags, boxes, tissue and stickers carrying your identity.
Size & Barcode Labels
Retail-ready labelling, including EAN and UPC barcodes on request.
What to expect
More than a supplier.
A manufacturing partner.
Six commitments that shape how every order runs here. They are not marketing lines — they are the things brands tell us their last factory got wrong.
01You talk to the people making it
No account layer between you and the floor. Questions about a seam get answered by someone who has seen the seam.
02Fabric chosen for the product
We source to your spec rather than steering you toward whatever is already in the building. If your target is not achievable at your price, we say so early.
03Sample before bulk, always
Nothing goes to production on a promise. You approve a physical garment first, and bulk is measured against it.
04Branding treated as part of the garment
Labels, tags, patches and packaging are specified alongside the product, not bolted on once it is finished.
05Construction you can inspect
Seam type, stitch density and reinforcement are documented per style, so you know exactly what you are buying.
06Checked before it is packed
Quality control runs through production, not at the end of it. Anything outside tolerance is remade, not shipped.
Before you start
Questions we
get asked first.
If yours is not here, message us on WhatsApp — you will get a straight answer from someone who works on the floor.
Ready to put your brand on it?
Send a tech pack, a sketch or a reference garment. We will come back with construction options, fabric routes and an honest price.
25 pcs minimum · Worldwide shipping · Sialkot, Pakistan